| This custom part replaces a 20V's distributor cap when converting to rear wheel drive. There are two versions available- the slim cover at 25mm thick for cars very tight on space or the 30mm thick cover for cars such as left hand drive models where space is not so much of an issue. |
   |
Slimline Blanking Cover (25mm) New and improved these covers have been carefully designed from the beginning to be simply the best. Slim:These covers are the thinnest there is bar none! 2mm thinner than the "thinnest on the market" from Sp-Tec and 5mm thinner than the previous model offered. The angled edges further help clearance so these can clear heater hoses with ease. Even in the case of accidental contact all edges have been smoothed over to not cause any damage or wear. This part is ideal for right hand drive ae86/ae71/ke70s or any other engine bay short on space. Strong: Starting from a solid billet block these go through the time consuming process of being machined inside and out leaving material where it's needed most whilst still keeping the lowest profile. The result being that these will be able to handle some decent hits without issue. Style: With an outside profile matching the original dizzy housing these caps allow for an OEM style fitment, partially polished for a further touch of class. Bolts: Instead of using the ugly and aged bolts salvaged from the old cap three new stainless button/dome head bolts are supplied. Price for Complete Assembly: $90 AU (Click on any image to zoom in) |
|
Standard Blanking Cover (30mm) Catering for those who don't need the slim covers these look the same but are only 5mm thicker. These are ideal for cars such as the GTS and SR5 corollas. Shape:These covers are 30mm thick so while 5mm longer than the slim model these are still very compact. The angled edges further help clearance so these can clear heater hoses with ease. Even in the case of accidental contact all edges have been smoothed over to not cause any damage or wear. Strong: Starting from a solid billet block these go through the time consuming process of being machined inside and out leaving material where it's needed most whilst still keeping the lowest profile. The result being that these will be able to handle some decent hits without issue. Style: With an outside profile matching the original dizzy housing these caps allow for an OEM style fitment, partially polished for a further touch of class. Bolts: Instead of using the ugly and aged bolts salvaged from the old cap three new stainless button/dome head bolts are supplied. Price for Complete Assembly: $80 AU (Click on any image to zoom in) |